Energy 4 speed User Manual

> Keep away from children’s reach! Children should be supervised to ensure that they do not play with the appliance!
> Do not leave the device unattended when in operation!
> Disconnect device from mains supply after use!
> If the safety instructions are not followed, it may lead to damage to the device or battery and could cause injury!
> We recommend the use of ANSMANN rechargeable batteries!
FUNCTIONAL OVERVIEW
> Fastchargerfor1-4NiCdorNiMHcellsofthesizesMignon(AA)andMicro(AAA)
> Chargingcurrentselectablebytheswitch„Fastcharge“/„Standardcharge“
> The charging condition of cells is irrelevant before charging
> Automatic start of charging at contact with the battery
> Microprocessor controlled charging and monitoring of the charging status
> Microprocessor controlled and individual supervision of each cell
> Automatic charging current adjustment
> Reverse polarity protection
> Multiple over charging protection by -deltaV detection, temperature control and safety timer
> Automatic switch to trickle charge
> Faulty rechargeable battery detection and Alkaline detection
> Clear LED indicator per charging slot shows the rechargeable battery status
> Switchmodepowersupply(100-240VAC/50-60Hz)forworldwideuse
> Operationalsowiththeprovided12Vcaradapterpossible
OPERATION
Place the charger on a level surface and make sure that the ventilation slots are not covered. Connect the power supply
orthe12Vcaradaptertothechargerandafterwardstothepowersource(seeTECHNICALDATA).Selectthecharge
currentbytheswitch„Fastcharge“/„Standardcharge“beforeinsertingfastrechargeablebatteries.Werecommend
thatNiCdcellsarechargedintheswitchposition„Standardcharge”.Alwaysconnectthecellsintherightdirectionfor
polarity (according to the symbols in the charging slots). After inserting a cell, the charging process starts automati-
cally.Thischargercancharge1-4NiCdorNiMHcellsofthesizesMignon(AA)orMicro(AAA).Whenseveralcells
are to be charged, they do not need to be inserted at the same time, as the charging process starts individually. The
charge state of each cell will be indicated by the LED (see LED INDICATORS). It is normal that batteries become warm