Datasheet

OPERATING INSTRUCTIONS POWERLINE 5 MOBIL
Please read the operating instructions before use!
USE OF THE CHARGER
Charger with discharge function for 1-4 NiCD/NiMH batteries of the sizes Micro (AAA); Mignon (AA); Baby (C); Mono
(D) and 1-2 9V block.
ATTENTION
Use only with NiCD/NiMH cells. Non rechargeable batteries or other types could cause an explosion!
Do not attempt to charge Alkaline batteries or other types of primary batteries
Do not dispose of batteries in fire as the battery may explode, leak or catch fire
FEATURES
Separate charging processes for each inserted cell; Automatic start of charging at contact with the cell; NiCD as well as
NIMH cells can be charged at the same time; Microprocessor controlled charging for cylindrical cells; Automatic switch-
over to trickle charging for cylindrical cells; Discharging option for cylindrical cells; Faulty cell detection for cylindrical
cells
DISPLAY FOR CYLINDRICAL CELLS (1):
Green LED blinking (1 x sec): charging
Green LED flashing: ready /trickle charge
Green LED blinking fast (2 x sec): faulty cell
Green LED´s blinking alternative from the right side to the left side: discharging
DISPLAY FOR 9V BLOCK (2):
LED flashing red: charging
DISCHARGE BUTTON (4):
Press this button (PRESS) for approx. 3 seconds to start the discharge function for the cylindrical cells.
SAFETY INSTRUCTIONS:
Keep the charger in a dry place (indoor or in-vehicle use only); In order to avoid the risk of fire and / or electrical
shock, the charger must be protected against high humidity and water; Ensure that the ventilation slots are kept free, to
guarantee perfect function of the unit and avoid over-heating; Do not plug in the charger if there are any signs of damage
to the housing, cables or plugs; Do not open or reconstruct the charger or any adaptors; In the case of a defect, please
return to an authorized service centre; Keep out of reach of children; Disconnect the device from the mains after use; To
clean the device please disconnect from the mains and use only a dry cloth