Manual

EN
TECHNICAL DATA
Ratedvoltage:    400VAC50Hz
Ratedpower:    11kW
Vehicleplug:    IEC62196-2Typ2-lle
Infrastructureplug:   IEC62196-2Typ2-llb
No.ofphases:    3-phase
Output:    16A
Highvoltageresistance:   2600VAC
Contactresistance:   ≤0.3mΩ(L/N)
Isolaonresistance:   500MΩ(1000VAC)
Resistorcoding:    680Ω
Chargemode:    IEC62196-2,IEC61851-1
Contactthermalrise:   ≤50K
Protecontype:    IP55(pluggedin)
Workinghumidity:   5%-95%noncondensed
Withdrawalforce:   45N/80N
Flammability:    UL94V-0
Operangtemperature:   -25°C-+55°C
Plugingcycles:    ≥10000x(noload)
Cable:     5x2,5mm²+1x0,75mm²
Weight:    5m:2,1kg|7,5m:3,35kg
OPERATION
Observetheoperanginstruconsforthechargingstaonandtheelectricvehicle.
1.Switchothevehicle.Gotoparkingmode.
2.Removetheprotecvecapsfromthechargingplugsandconnecttheinfrastruc-
turechargingplugtotheinfrastructurechargingsocketandthevehiclecharging
plugtothevehicleinlet.Ensurethecorrectassignmentandcheckthattheplug
conneconsarecorrectlyandcompletelypluggedin.
3.Startthechargingprocessatthechargingstaon.Thechargingplugsare
automacallylocked.
4.Toendthechargingprocessprematurely,followtheoperanginstruconsofthe
chargingstaon.
5.Aerthechargingprocessisnished,thechargingplugsareautomacally
unlocked.
6.Disconnectthechargingplugsfromthechargingstaonandtheelectricvehicle
(EVmustbeunlocked).
7.Puttheprotecvecapsonthechargingplugsandrollupthecablewithoutkinks.