Instructions

Deutsch | English | Français | Español | Português

Deutsch | English | Français | Español | Português

SETTING THE FLOODLIGHT

• Loosen the set screws.

≤ 100°

≤ 90°

• Set the desired angle of the floodlight (-100° to +90°).

• Tighten the set screws with a hex key.

CLEANING

• Always disconnect the power supply at the fuse box before cleaning

the product. Secure the product against unintended reactivation by

placing a warning sign on the fuse box.

• Use only a soft, dry or slightly damp cloth (where necessary with a

little mild dishwashing detergent) to clean the product. Never use any

abrasive cleaners or solvents to clean the product.