User manual

Deutsch | English | Français | Español | Svenska
Nederlands | Dansk | Čeština | Slovenský
100% light intensity 20% light intensity
Brightness: Up to 330 Lumen Up to 70 Lumen
Max. luminous intensity: Up to 105.000 Candela Up to 22.000 Candela
Theoretical beam distance: Up to 650 m Up to 300 m
Operating time: Approx. 6 hours Approx. 13 hours
Protective class: IP54
Additional functions: Smooth focusing
Optional emergency light in case of a power failure
(Dependant on switch position)
Accessories included: [3] wall mount, [4] USB power supply AC, [5] USB cable,
[7] USB Car adaptor DC, [8] Carrying strap
CHARGING PROCESS:
§ Before operating for the first time, the light should be fully charged.
§ The light should also be fully charged before being stored for a long period of time.
§ The following charging options are included:
- Via USB power supply at the socket (4): 100 - 240 V, 50/60 Hz.
- Via USB cable (5) directly to the computer, laptop etc. or in the car/truck.
§Charging mode: CCCV with fourfold safety shutdown (short circuit, over charging, deep discharging,
over load)
§ For charging, insert the search light into the charging station (3), which must be connected either to
a socket via the USB power supply or to a secondary device/car cigarette lighter socket via the USB
cable.
§ Charging status indication via DUO-LED (6):
- Battery is fully charged LED flashes green
- 0% - approx. 30% LED lights red
- Approx. 30% - approx. 70% LED lights orange
- Approx. 70% - 100% LED lights green
§ Discharging status indication via DUO-LED (6):
- 100% - ca. 75% LED lights green
- Approx. 75% - approx. 15% LED lights orange
- Approx. 15% - 0% LED lights red
§The search light recognizes when the battery pack is fully charged and cuts the power, so
overcharging is not possible.
§The charging station and the USB power supply are only for use with ANSMANN AS10 LED
search lights.