User manual
8. Battery fully charged
Once the battery is fully charged, unplug the mains cord and afterwards remove the battery terminals of the battery, first the
black terminal (-) and then the red (+) terminal.
9. Trickle charge
Alternatively, the battery can be left connected for an extended period (e.g. for the winter). The charger detects any loss of
capacity and recharges automatically.
SPECIFICATIONS
Input Voltage: 230V AC / 50Hz
Protection class: II
Protection: IP65
Charge voltage: 6V: 7,25V / 12V: 14,5V / 24V: 29,0V
Charge voltage COLD TEMP.: 6V: 7,45V / 12V: 14,9V / 24V: 29,8V
Adjustable charging currents: 0,5A / 1A / 2A
Battery capacity: 1,2Ah – 80Ah
DISCLAIMERS
The information in this manual may be amended without notice. ANSMANN assumes no liability for any direct, indirect, inci-
dental or consequential damages or any other damages caused by improper handling or disregard of the information contained
in this manual.
WARRANTY INFORMATION
ANSMANN offers a 3 year warranty on this device. No guarantee will be given on damage to the charger due to non-compliance
with these instructions.
Information subject to change without prior notice. ANSMANN assumes no liability for printing errors. 06/2014