Quick Start Guide

1
IMPORTANT! This instruction guides you how to install surveillance system.
What accessories you need before getting started
1.One monitor or TV,can not be less than 19"
2.One VGA Cable/one HDMI Cable,use any one that monitor supports
3.One surge protector (advisable)
4.Power supplies for the NVR and cameras. Only use approved PSU's from your supplier.
5.Appropriate tools for installation.
Note:
This instruction guide provides basic information on how to install your CCTV system.
In a few seconds, you can see the Wizard Setting.
Then set password to login the system . (Password must be at least 6
characters)
Connect the WiFi Camera with Power.
Connect Monitor to the WiFi NVR with HDMI, or VGA Port
Connect the NVR to Router with an Ethernet cable
Plug the Mouse to the USB port
Plug NVR to Power
3
1
2
4
5
2
5
Monitor/TV
(VGA/HDMI)
4
Mouse & USB
BACK UP
Power Port
3
Router
Camera
1
Install Your System
A