User's Manual

Specification
Rated output power: 1.6W RMS
DC Power input: USB: 5V, 500mA
Bluetooth specification: V3.0 + EDR
Supported Bluetooth Profiles: AVRCP, A2DP
Range: maximum 10 meters (33 feet) line of sight
Working temperature: 0C – 50C
Troubleshooting
No power:
- Recharge your speaker
No Sound:
- Adjust volume on your Bluetooth device or the speaker
- Make sure that your Bluetooth device is connected with the speaker and they are within the
effective operation range
Cautions:
1) Due to the used enclosure material, the device shall only be connected to a USB Interface
of version 2.0 or higher. The connection to so called power USB is prohibited
2) Caution Risk of explosion if battery is replaced by an incorrect type.
3) Dispose of used batteries according to the instructions
4) Do not expose the device to an extremely high electromagnetic filed, this may impair the
correct functioning of the device.
5) The normal function of the product may be disturbed by strong Electro-Magnetic
Interference. If so, simply reset the product to resume normal operation by following the
instruction manual. In case the function could not resume, please use the product in order
location.
FCC Statements
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct