User's Manual

Bluetooth Water Resistant Speaker

Power

The speaker operates on built-in rechargeable battery

To recharge the built-in battery, open the rubber cap on the back casing and connect micro

USB socket with PC through supplied USB cable

Charging: Red LED indicator turns on

Fully Charged: The red LED turns green when it is fully charged

Close the rubber cap firmly after charging.

Play from a Bluetooth device

Note: The effective operation range between the speaker and your Bluetooth device is

approximately 10 meters (33 feet) line of sight maximum

- Press [ON/OFF] button on back casing to turn on the speaker

- The blue LED indicator will flash

- Activate the Bluetooth function in your Bluetooth device

- Select “BT Speaker” on your Bluetooth device for pairing

- When connected, the blue LED indicator stays steadily on

- Start music play on your Bluetooth device

- Adjust volume on your Bluetooth device or press the [+] or [-] button on the speaker

- Press [Play/Pause] button on the speaker to play or pause music

- Press [Forward] or [Backward] on the speaker to select your music

- Press the [ON/OFF] button again to switch off the unit when it is not in use for power

saving. Blue LED indicator will turn off

Play from an external device

- Press the [ON/OFF] button to turn on the speaker

- Open the rubber cap on the back casing and connect your speaker with an external device

through a 3.5mm line-in cable

- Start music play on your device

- Press the [ON/OFF] button again to switch off the unit when it is not in use for power

saving

- Close the rubber cap firmly after use

Note: The speaker is not water resistant while playing music through a 3.5mm line-in cable

since the rubber cap needs to be open.

PAGE 1
Bluetooth Water Resistant Speaker Power The speaker operates on built-in rechargeable battery To recharge the built-in battery, open the rubber cap on the back casing and connect micro USB socket with PC through supplied USB cable Charging: Red LED indicator turns on Fully Charged: The red LED turns green when it is fully charged Close the rubber cap firmly after charging.
PAGE 2
Specification Rated output power: DC Power input: Built-in rechargeable battery: Bluetooth specification: Supported Bluetooth Profiles: Range: Water resistance level: Working temperature: 1.6W RMS USB: 5V, 500mA 500 mAh V3.
PAGE 3
correct functioning of the device. 5) The normal function of the product may be disturbed by strong Electro-Magnetic Interference. If so, simply reset the product to resume normal operation by following the instruction manual. In case the function could not resume, please use the product in order location. FCC Statements This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of FCC Rules.