User manual

Quick Guide
Step 1: Broadband (ADSL/Cable Modem) Connections for VS211
A. Connect VS211 WAN port to ADSL NAT Router as the following connection.
B. Connect VS211 LAN port to Notebook PC LAN port using a Category 5 LAN cable.
C. Connect VS211 RJ11 PHONE port to a Telephone Set.
D. Connect VS211 RJ11 LINE port to a PSTN Telephone Line.
E. Connect 12VDC Power Adaptor. After power on, the POWER LED will be Green ON.
F. The PHONE LED will be Green flashing for a successful SIP registration. Pick up the phone,
and it will be Green ON indicating VoIP mode.
G. Press 0* key, and the PHONE LED will be Yellow ON indicating PSTN mode.
H. Press #121# and #120# from the phone to listen to IVR and to check the DHCP status and the
IP address (e.g. 192.168.123.1) for VS211. After the IP announcement, please hang up.
Figure A. ADSL Connections with NAT Router for VS211
Step 2: Settings for VS211 from PC Web Browser
A. This is an example for FWD ITSP provider using ADSL connection with NAT router as in Figure
A. Both parties sign up to FWD SIP server http://www.freeworlddialup.com with individual
registered FWD phone numbers and passwords.
B. Pick up the phone and press #120# from the phone to listen to IVR and get the IP address (e.g.
192.168.123.1) for VS211.
C. Enter the IP address from PC Web browser for configuration settings.
Example: Enter http://192.168.123.1 from IE Web browser to display login page.
D. Enter the user name and password into the blank field. The default settings are Username:
root Password: test . Click the “Login” button to enter for configurations.
i
LAN
PHONE
NAT Router
ADSL Modem
VS211 IP: 192.168.123.1
W
AN
PC IP:
192.168.1
23
.1
50
LINE
PSTN
INTERNET