User manual

Dial Plan Settings:
8.27. The dial plan allows you to map the dialing into an easy-to-remember phone number system.
When replace prefix code is OFF, the calling number are the same as the dialing number.
When the prefix code is ON, the auto prefix rules will be applied in accord with the settings.
The auto dial timer specifies the elapse time to start sending out calling number after finished
dialing.
8.28. Symbol Representations:
8.29.
Replace rule: If replace prefix code is ON and the prefix number is matched with rule 001 or 006 or 009
as the example web page below, then the prefix will be replaced with 005.
8.30. Dial Plan: When the first dialing digits matched with one of the patterns, VS211 will send out the
matched corresponding number immediately.
8.31. Example:
8.32. Auto Prefix: Prefix number will be added if the Dial Plan or Unset Plan are NOT matched.
8.33. Prefix Unset Plan: When first dialing digits or dial numbers match with pattern then VS211 will ignore
auto prefix.
8.34. Example:
8.35. Auto Dial Timer : The inter-digit timer. Default is 5 seconds.
8.36. When you finish the setting, please click the Submit button.
8.37. Click the Save Change Item in the left side, then click the Save button. The changes you have made
will be saved into the system and the system will Reboot automatically.
13
Symbol Representations
x or X 0,1,2,3,4,5,6,7,8,9
+ or
Dial Plan Descriptions
*xx To dial one of *00, *01, …,*99 will send out the number immediately
#xx To dial one of #00, #01, …,#99 will send out the number immediately
10x To dial one of 100,101, …,109 will send out the number immediately
11x To dial one of 110,111, …,119 will send out the number immediately
Xxxxxxxx To dial 8 digits will send out the number immediately
Prefix Unset Plan Descriptions
0 Ignore auto prefix if first digit is ‘0’
1 Ignore auto prefix if first digit is ‘1’
xxxx Dialing with 4 digits will ignore auto prefix
xXxXxX Dialing with 6 digits will ignore auto prefix