Installation guide

9
3. Factory Default Reset
This button is used to restore the all factory default settings.
4. DC-in Jack
The input power is 12VDC. Note that supply the power to the Network Camera with the
power adapter included in package.
5. MIC in (audio in)
Connect a microphone to the network camera.
6. Line out (audio out)
Connect a loud speaker to the network camera. This function is for voice alerting and
two-way audio.
2.3.1 Vandal P/T Camera Installation
Fix the camera to ceiling with the three supplied screws
Fixed it by
S
crews
RJ45
DI/DO
12V DC in
MIC in
Line out
Factory
Default Reset