Installation guide

8
Wall Mount
1. Fix the L-type bracket to the wall using two holly wall anchors and screws
2. Fix the camera to L-type bracket with the two supplied screws
2.3 Vandal PT Cameras
1. RJ45 LAN socket: Connect to PC or Hub/Switch.
Please use Category 5 cable to connect the Network Camera to a 100Mbps Fast Ethernet
network switch or hub.
In the LAN socket, there are two LEDs embedded:
LAN LED (green color)
This LED will be flashing while network accessing via Ethernet.
Power or Wireless LED (orange color)
This LED is used to indicate whether DC power is on or not. In addition, this LED will be
flashing while the wireless accessing of the Camera.
2. DI/ DO: Connect to sensor in and alarm out devices .
Cable for I/O connectors:
Name Cable Color Function
12VDC Brown/White DC 12V (50mA maximum)
GND Blue/White GND
NC Purple/White Do not connect
NC Gray Do not connect
DI Green/White Digital signal input
DO Orange/White Digital signal (alarm) output