Installation guide

7
7. Done
2.2 P/T Camera
Audio Output Jack
It allows this device to output audio or alerting sound.
DC Power Jack
The input power is 12VDC. Note that supply the power to the Camera with the power adapter
included in package.
Antenna Connector (wireless model only)
User can attach the included wireless antenna to this connector (SMA type) or use another high-gain
antenna to get higher performance.
LAN Socket
Please use Category 5 cable to connect the Network Camera to a 100Mbps Fast Ethernet network
switch or hub.
Factory Default Reset
This button is hidden in the pinhole.
2.2.1 P/T Camera Installation
Ceiling Mount
1. Fix the camera to L-type bracket with the two supplied screws
2. Fix the bracket and camera to the ceiling using two holly wall anchors and screws
Factory Default
Reset
LAN Socket
DC Power Jack
Audio
Out
p
ut Jack
Antenna
Connector