Installation guide

12
3. Connect RS485 D+ and D- (if you need to control PT scanner)
4. Connect the attached power adapters to camera and heater (option/by model) and
plug-in these adapters into power outlet
5. Done
2.6 Cube Cameras
LAN Socket
Please use Category 5 “straight through” cable to connect the Network Camera to a
100Mbps Fast Ethernet network switch or hub.
Audio Output Jack
Audio-out Jack allows this device to output audio or alerting sound.
DC Power Jack
The input power is 12VDC. Note that supply the power to the Network Camera with the
power adapter included in package.
Factory Default Reset
This button is hidden in the pinhole beside the DC Power Jack.
2.6.1 Cube Camera Installation
1. Attach the Camera with the included stand
2. Place the Camera on the table or fix it onto ceiling or wall
Use three screws to fix the Network Camera onto the ceiling or wall. You could also put the
Network Camera on the table directly.
LAN Socket
DC Power
Jack
Factory
Default Reset
Audio
Output Jack
Fixed it by
S
crews