Installation guide

6
5. Connect the necessary cables and connectors:
- Plug-in Ethernet Cable into LAN port (necessary)
- Connect the attached power adapter to camera and plug-in this adapter into
power outlet (necessary)
- Connect Video BNC connector to a local TV if necessary (to check camera
viewing angle)
6. Done.
2.2 Vandal IP Dome Camera Installation
1. Use the provided L-wrench, loosen the vandal-resistant housing cover (with screws
still attached on the cover).
2. Set the mounting base onto the wall or ceiling and center it over the mounting hole, using
the supplied four retaining screws to secure the main body.
4.3. Z-axis
Panning View
Angle range is 0
o
~180
o