User manual


64
whichadministrator can configure. This is a better way for log management.8
levels indebug information: Level 0---emergency: This is highest default debug
info level.
You system can not work.
Level 1---alert: Your system has deadly problem.
Level 2---critical: Your system has serious problem.
Level 3---error: The error will affect your system working.
Level 4---warning: There are some potential dangers. But your system can work.
Level 5---notice: Your system works well in special condition, but you need to
check
its working environment and parameter.
Level 6---info: the daily debugging info.
Level 7---debug: the lowest debug info. Professional debugging info from R&D
person.
At present, the lowest level of debug information send to Syslog is info, debug
levelonly can be displayed on telnet.
The items describe:
¾ Server IP： Syslog server IP address
¾ Server Port：Syslog server port
¾ MGR Log Level：config MGR log level
¾ SIP Log Level：config SIPlog level
¾ IAX2 Log Level：config IAX2log level
¾ Enable Syslog：Enable/Disable Syslog