Specifications

2515
108M Wireless Router User Guide
4
Off The router has a hardware error
Off There is no wireless device linked to the router
WLAN
Flashing The Wireless function is enabled
Off There is no device linked to the corresponding port
On
There is a device linked to the corresponding port but no
activity
WAN,1-4
Flashing There is an active device linked to the corresponding port
2.3.2 The Rear Panel
The rear panel contains the following features. (View from left to right)
¾ AC power socket: Please use the power adapter which is supplied with the 2515 108Mbps
Wireless Router only, the use of a different adapter may result in product damage.
¾ Four 10/100Mbps RJ45 LAN ports for connecting the router to the local PC(s)
¾ RJ45 WAN port for connecting the router to a cable/DSL Modem, or Ethernet
¾ Factory Default Reset button
There are two ways to reset the router's factory defaults:
1) Use the Factory Defaults function on System Tools -> Factory Defaults page in the
router's Web-based Utility.
2) Use the Factory Default Reset button: First, turn off the router's power. Second, press
and hold the default reset button then turn on the router's power, until the SYS LED lights
up (about 3 seconds). Last, release the reset button and wait for the router to reboot.
)
Note:
Ensure the router is powered on before it restarts completely.
¾ Wireless antenna
Figure 2-2 Rear Panel sketch