Operating Instructions

Break the
sealing
band and
bring the
end of the
paper
up
over the
back of
the camera
opening and thread
the pointed
end
into
the wide
slot in the take-up
spool.
Be very careful
ro
see
rhat the
film travels
straight
across rhe
opening and
do not attempt to thread
the film
under the roller
at the
edge
of
the
opening.
Turn the winding
knob a few turns
so
the film is
securely fastened
to the
spool. Close the back
of
the camera
and
continue winding the film
to
6gure 1
by
turning
the winding
knob
back
and
forth through its
full
range
of
action.
A
pointing
hand
and a
series of dots will
appear in
the
red window
on
the
back before
rhe figure
i.
This
winding
action
'rverages
between
45
and
50forward
rwists
of
the
winding
knob. The
film
is now in position
for the
first
plctufe.