Operating Instructions

LET'S
LOAD THE
CAMERA
Open
the
back
of
the
camera
and
make
sure
ao empty spool
is in the
upper
chamber.
Put a
sPool
in
bY
pressing
the
spool
against
the spring
on
the
left and
fitting the slot
of
the
spool
over
the stud on
the sPring.
Then
lower
the
spool
and fit
the
slot
on
the
right
end over
the key.
Turn
the
winding
knob
a quarter
turn
to be sure
the sPool
and
keY
are
properly engaged.
To simplify
loading,
this
camera
has
been
de-
sisned
so
the'film
retainer
is
built
into
the back
so
the film
is loaded
in an easily
accessible
spot.
Spreading
either
spring,
fit the roll
of
film
into
the
holder so
that both
ends
of
the
spool
are
held
in place.
The roll should be
in position
so
that
the
film
unrolls
with
the printed side
of
the
protective
paper uPPermost.
www.orphancameras.com