User's Manual
X For length adjustment, release the clamping screw [C1] by hand
in a counter-clockwise direction until the clamping piece located
underneath reveals the clamping rings [1] and [2].
X Set the clamping rings to the desired distance.
X To adjust the angle of the buttplate, release the screws [h] and [i]
additionally.
X After fine adjustment, the front one of the clamping rings [1] and
[2] should be enclosed by the clamping piece.
X The clamping screw [C1] should be closed by turning in the
clockwise direction hand-tight.
X The screws [h] and [i] must be tightened.
[h] [1]
[i] [2] [C1]
Fig. 12a Buttplate adjustment on the 9003 Precise
The buttplate can be set in many different ways (depending on the
model).
[z]
[z]
[y]
[x]
Fig. 13 Buttplate adjustment options (shown for the Type 4759 aluminium buttplate)
[x] Clamping screw for upper plate wing
[y] Clamping screw for height adjustment and swing movement of the buttplate
[z] Clamping screws for lateral displacement (changing the buttplate fixing)