User's Manual
X Coarse cheek piece adjustment is carried out by actuating the
rotary knob [D1].
X Fine adjustment of the height of the cheek piece is carried out
using the setting wheel [G1].
X Axial displacement of the cheek piece is carried out by actuating
the screws [H1] and [J1]. The screws can only be released and
tightened using a screwdriver.
X The horizontal angle of the cheek piece can be adjusted to suit
by actuating the rotary knobs [E1] and [F1].
[H1]
[E1]
[D1]
[G1]
[F1]
[J1]
Fig. 11a Cheek piece adjustment possibilities on Model 9003 Precise
X Release the clamping screw [a].
X Remove the buttplate [13] from the holder.
X Fit in reverse order.
The buttplate [13] offers various different setting options. The clamping
screws must be released for setting the various different options.
X Release clamping screws [a] and [c].
X Turn the knurled nut [d] until the desired inclination and length
are reached.
X Retighten the clamping screws [a] and [c] again hand-tight.
[a][d]
[13]
[c]
Fig. 12 Removing/adjusting the buttplate