User's Manual
The safety catch can also be used as a dry firing device.
X Open the cocking lever and swing it slowly to the rear until
a stop is felt.
X Push the safety catch in to "S".
9 Dry firing device is active.
X Close the cocking lever.
X Release the trigger.
The safety/dry firing device can only be actuated
when the airgun is cocked.
The compressed air rifle is fitted with an exchangeable compressed air
cylinder [4]. The compressed air cylinder [4] can be exchanged in both
the full and empty condition. On delivery, the compressed air cylinder
[4] is not screwed in tightly. You should always use the covering cap
to protect the thread on the compressed air cylinder [4] from dust and
damage.
Only genuine ANSCHÜTZ compressed air cylinders
(max. 200 bar) may be used!
Repairs to compressed air cylinders may only be
carried out by the manufacturer using genuine
replacement parts.
If this is not observed, the liability and guarantee
become void.
X Fill the compressed air cylinder before using.
X Screw the compressed air cylinder slowly and carefully, hand-tight,
into the thread on the sub-assembly carrier (to avoid
damage).
$$ A$perceptible$resistance$is$felt$shortly$before$the$stop,$and$the$valve$opens$automatically.