User's Manual

Attention!
After actuating the trigger in the safe condition (dry
firing), the firearm must be re-cocked to release it.
Forcible changeover of the safety can lead to
damage and inadvertent discharge of a shot.


 
X Remove circlip [a] from the pin [b].
X Remove pin [b].
X Release set screws [c].
X Remove the complete cocking lever assembly [d] and re-fit
on the opposite side in reverse order.
[2]
[a]
[b]
[c]
[d]
Fig. 8 Converting the cocking lever [2]
