Manual

24
Trigger
Warning:
Your ANSCHÜTZ target rifle offers you a
versatility of individual adjusting properties.
Please make sure that your rifle always is
unloaded when carrying out adjustments.
the bolt body. Turn the bolt handle until
the cocking cam is in line with the slot at
the end of the bolt body.
•Insert the complete firing pin with spring
and spring support with the pin first into
the bolt body and ensure that its lug
penetrates the longitudinal slot.
•Attach the cover sleeve and rear spring
support with its slotted end towards the
front of the bolt body. This can only be
done when the guide tab at the base of
oneslot is lined up with the slot in the bolt
body.
•Finally insert the signal pin, large end first,
and the small compression spring and
screw on the bolt cap.
•Before inserting the assembled bolt in the
receiver, recock the bolt by rotating the
bolt handle counter-clockwise (for left-
handed bolts clockwise).
i
r
et
uo
pa sd f
Trigger adjustments
1. Trigger weight:
Adjust the trigger weight with set screw
No. 10 (silver screw):
•if you turn it to the right:
trigger weight is increased (+)
•if you turn it to the left:
trigger weight is decreased (-)
Trigger weight and first stage weight
depend on each other with regard to the
mechanic mechanism. If one of them is
changed there will always be a corres-
ponding change of the other as well.