Manual

22
Fitting the barrel
The screws for fixing the barrel must not be
loosened. Should it be necessary to
Assembly, fitting the
ANSCHÜTZ barreled action
The stock, the barreled action and the bolt
are packed separately for shipment and
need to be assembled. However, do not do
this until you have followed all the
procedures listed below.
•Wipe away excess oil from the barreled
action and the bolt.
•Insert the cocked bolt (also see chapter
„Disassemble the bolt“). The bolt is
cocked when the red ring at the end of
the bolt is visible (see picture).
•Insert the barreled action into the barrel
channel in the stock and press both parts
together. Please note that the abutment
must fit exactly to the shape of the reciever
in the stock as otherwise correct joining
together of both parts cannot be guaran-
teed. The top surface of the abutment must
not touch the bottom of the receiver,
however.
Note: The abutment in the stock must be
inserted into the mill-out at the bottom of
the receiver. It must not touch it, however.
•Screw in bedding screws with enclosed
Allen wrench Model No. 4406
(Order No. 710.6301). First slightly
tighten all screws. Then tighten the front
screws and subsequently the rear screws
(in the direction of the muzzle). For correct
adjustments we recommend our torque
wrench model No. 4405 (Order No.
700.6180), which is to be adjusted to
5 Nm (= 50 cmkp) for wood stocks and
to 6 Nm (60 cmkp) for aluminum stocks.
•Pull a cleaning patch through the barrel
from the chamber towards the muzzle
several times.
After assembly for the first time large
settlements of the stock wood may occur.
Consequently we suggest that you tighten
the screws once more in the manner
described after some time. Check the the
screws before every shooting.
signal pin is visible
= cocked
uncocked
signal pin
2007/660 Alu stock · 2013/690 Alu stock
Caliber: .22 l.r.
Barrel length: 66 cm/69 cm
25.9“/27.1“
Rifling: 66 cm/69 cm
25.9“/27.1“
Total length: 109-112 cm/112-115 cm
42.91“-44.09“/
44.09“-45.27“
Sighting line: 77 cm/80 cm
30.3“/31.4“
Weight: 5,35 kg/5,7 kg
11.7 lbs/12.5 lbs
Version: Single loader