Manual

2322
3. To empty the compressed air cylinder
we recommend to use our air release screw
(Order-No. 711.3408). After approxi-
mately 20 refills of the compressed air
cylinder it should be emptied completely
to get rid off possible condensed water.
4. Compressed air cylinders which are
leaky, defective or older than 10 years must
be emptied and must not be used and filled
anymore. After 10 years from the date of
manufacture the compressed air cylinder
must be checked by the manufacturer for a
fee. The date of manufacture can be seen
from the compressed air cylinder.
5. Compressed air cylinders and refill
bottles must be stored in a dry, dust and
grease/oil free place.
6. Protect valves and threads with the
corresponding caps when you have
removed the compressed air cylinder.
Never grease or oil the valves or
threads of the compressed air cylinder.
Danger of explosion!
7. Compressed air cylinders must not be
filled with more than 200 bar (2,790 psi)
at room temperature. Only use compressed
air free of oil or water (DIN EN 12021 -
inhaled air). According to legal regulations
we only deliver unfilled compressed air
cylinders.
8. Never try to open a compressed air
cylinder yourself or to carry out mechanic
modifications. Protect your compressed air
cylinder against external force.
9. Apart from the notes above the technical
rules of your country with regard to the
Ear and eye protection
You and other persons should always use
approved hearing protection and approved
shatterproof eye protection while shooting.
Laws
When using a rifle observe the corres-
ponding regulations and laws for the use
of firearms in your country.
Attention:
for Model 2025:
v
0
: 245 m/s (803.8 ft/s)
Energy: 20,4 J (15.06 ftlbf)
for Model 2020:
v
0
: 210 m/s (688.9 ft/s)
Energy: 15 J (11.06 ftlbf)
Important note for the handling of
compressed air cylinders:
1. Only check the manometer level of the
compressed air cylinder when the rifle is
unloaded and uncocked. Never check it
while filling the compressed air cylinder.
Due to its design the manometer works with
an accuracy of +/- 10 %. Temperature
variations can also impair the accuracy of
the manometer.
2. Filled compressed air cylinders must not
be exposed to temperatures of more than
50° Celsius/120° Fahrenheit. Therefore
make sure during transport or storage that
the rifle is protected against heat, for
example by storing it in the Styrofoam
packing or by using a gun case. In planes
compressed air cylinders are only trans-
ported when they are not filled.
by an authorized gunsmith. Unqualified
handling or disassembly can cause injuries
or irreparable damage of the rifle.
9. Your rifle should always be handled with
extreme care. Make sure that it is never
dropped or placed in such a way that it
can fall. For transport purposes your rifle
should be dry and clean. We recommend
an approved protective gun case.
10. You must be in good physical condition
and mental health and not under the
influence of any substance (drugs, alcohol)
which might impair vision, dexterity or
judgement. Do not use your rifle when you
are tired. Tiredness may result in a loss of
control.
11. Clean your hands carefully after
shooting and cleaning your ANSCHÜTZ
product. Residues of bullets, powder or oil
might impair the health of your skin.
12. Your ANSCHÜTZ rifle has been
carefully built and inspected by skilled
technicians to provide maximum efficiency.
The service life depends on the owner’s
care and on cleaning following the owner’s
manual closely.
Liability
1. ANSCHÜTZ does not assume any
responsibility or payment of damage claims
for damages of any kind resulting from the
disregard of these instructions, non-qualified
treatment or repair, the use of non-original
ANSCHÜTZ spare parts, incorrect
handling, negligence, removal of the knot
varnish or unauthorized modifications.
2. The stock of this rifle has been very care-
fully checked by factory inspectors prior to
shipment and has been determined to be
free of defects. Certain kinds of abuse, such
as dropping of the rifle can cause damage
to the stock for which the owner is solely
responsible. We also assume no
responsibility for defects resulting from
inappropriate transportation (mail, plane,
etc.). Please immediately contact your
transporter in such a case.
3. Changes or alterations to this rifle or any
of its parts are prohibited. Such changes
or alterations can significantly impair the
safe use of our product and can lead to
accidents involving severe or even fatal
bodily injuries. Any product warranty will
automatically lapse in case changes or
alterations are implemented. Users are
requested to carefully inspect the product
with regard to possible changes and
alterations before use. In case of doubt you
should contact us for further information.
Product relating safety
instructions
filling of compressed air cylinders must be
observed.