Manual

24
do this until you have followed all the
procedures listed below.
•Wipe away excess oil from the barreled
action and the bolt.
•Insert the cocked bolt (also see chapter
„Disassemble the bolt“). The bolt is
cocked when the red ring at the end of
the bolt is visible (see picture).
•Insert the barreled action into the barrel
channel in the stock and press both parts
together. Please note that the abutment
must fit exactly to the shape of the reciever
in the stock as otherwise correct joining
together of both parts cannot be
guaranteed. The top surface of the
abutment must not touch the bottom of the
receiver, however.
Note: The abutment in the stock must be
inserted into the mill-out at the bottom of
the receiver. It must not touch it, however.
•Screw in bedding screws with enclosed
Allen wrench Model No. 4406
(Order No. 710.6301). First slightly
tighten all screws. Then tighten the front
screws and subsequently the rear screws
(in the direction of the muzzle). For correct
adjustments we recommend our torque
wrench model No. 4405 (Order No.
700.6180), which is to be adjusted to
5 Nm (= 50 cmkp) for wood stocks and
to 6 Nm (60 cmkp) for aluminum stocks.
•Pull a cleaning patch through the barrel
from the chamber towards the muzzle
several times.
1907 Light
Caliber: .22 l.r.
Barrel length: 66 cm / 25.9“
Rifling: 66 cm /25.9“
Total length: 113 cm / 44.4“
Sighting line: 77 cm / 30.3“
Weight: 4,4 kg / 9.6 lbs
Version: Einzellader
1913 · 1913 in stock 2213
Caliber: .22 l.r. / .22 l.r.
Barrel length: 69 cm / 69 cm
27.1“ / 27.1“
Rifling: 69 cm / 69 cm
27.1“ / 27.1“
Total length: 114-117 cm
112-115 cm
44.8“- 46.0“
44.09“- 45.27“
Sighting line: 80 cm / 80 cm
31.4“ / 31.4“
Weight: 6,5 kg / 5,6 kg
14.3 lbs / 12,3 lbs
Version: Single loader
1913 in stock 1907
Caliber: .22 l.r.
Barrel length: 69 cm / 27.1“
Rifling: 69 cm / 27.1“
Total length: 116 cm / 45.6“
Sighting line: 80 cm / 31.4“
Weight: 5,0 kg / 11.0 lbs
Version: Single loader
Assembly, fitting the
ANSCHÜTZ barreled action
The stock, the barreled action and the bolt
are packed separately for shipment and
need to be assembled. However, do not