Manual

32
Dry firing device
The length of the firing pin is adjusted so
that it definitely ignites the cartridges. If there
is no cartridge or cartridge case in the
chamber, the firing pin as well as the rim of
the chamber may be damaged when
dryfiring for a longer period. In order to
prevent any possible damage use either a
cartridge case (after about 5 practice shots
insert a different case) or preferably a tone
down disc 1927F-40. With this device you
can practice under competition conditions
without having to use ammunition.
Please attach as follows:
•Screw off breech1827F-24.
•Remove the Fortner action.
•Screw off screwed conduit sleeve
1827F-8.
•Pull off chamber 1827F-5 from the rear
bolt part.
•Attach tone down disc to firing pin.
•Screw together chamber1827F-5 and
rear bolt part with the help of screwed
conduit sleeve1827F-8.
•Cock Fortner bolt and insert it again.
Do not forget to remove the tone down disc
for live firing.
Attention:
If you change the trigger remove the bolt
from the receiver when fitting the trigger as
otherwise the trigger will be damaged.
Illustration Dry firing device