Manual

30
Adjustment of first stage with set screw No. 4:
•if you turn it to the right:
first stage is shortened
•if you turn it to the left:
first stage is extended
Attention:
Set screw No. 4 (first stage) can be turned
past the second stage function. In this case
the trigger does not work anymore.
Danger! Do not under no circumstances
remove the first stage completely in order
to change the two-stage trigger into a sin-
gle stage trigger.
5. Trigger stop:
The trigger stop is the distance from the se-
cond stage to the stop of the trigger blade.
Adjustment of the trigger stop with set screw
No. 8:
•if you turn it to the right:
overtravel is shortened
i
r
et
uo
pa sd f
•if you turn it to the left:
overtravel is extended
Attention:
The trigger stop set screw No. 8 can be
turned over the second stage or first stage
function. Malfunction (the trigger does not
release)!
6. Adjustment of the trigger blade
•Loosen hex screw No. 7
•Trigger blade No. 6 can be moved in the
longitudinal guide and can be tilted
laterally.
7. Change of two-stage trigger into
single stage trigger
Adjusting process:
•Turn first stage weight screw No. 4 clock-
wise until you have reached the maximum
first stage.
•Cock the rifle.
•Turn set screw No. 5 (first stage) counter-
clockwise until the triggerreleases.
•Turn set screw No. 5 from this position
approx.
1
/
4
turn clockwise.
The trigger is now adjusted to single stage
operation, there is no more first stage.
Warning:
Single stage triggers are very sensitive and
must be operated with special care.
The sear engagement of
5
/
100
mm is ob-
tained after the action is closed. In com-
bination with a minimum trigger weight