User's Manual

13.2 Elevation of the insert/aperture
X The insert/aperture is positioned at the desired height by
spring force when the hexagon socket screw is adjusted.
Fig. 30 Elevation of the insert/aperture
14 Maintenance/cleaning
Danger to life!
Danger to life from loaded firearm.
h Ensure that the rifle is unloaded before use
or during maintenance and cleaning work.
WARNING!
After each use of the rifle, apply a thin film of oil
to the steel parts and thoroughly clean the barrel.
NOTE!
Injury and physical damage!
Danger of injury or physical damage as a result of
not removing the oil from the barrel and chamber.
h Each time before shooting, any oil or foreign
objects must be removed from the barrel and
chamber.
CAUTION!
20
13 Adjusting the rear sight and insert/aperture
13.1 Windage of the rear sight
X Release the hexagonal socket screw.
X Move the rear sight to the right or left.
X Re-tighten the hexagon socket screw.
Fig. 29 Rear sight windage