User's Manual

10.2 Inserting
X Cock the bolt (see Chapter 11).
X Place the bolt [3] on the receiver [5] (guide slot pointing
downwards) and slide the bolt [3] forwards until it engages
(in the direction of the arrow).
Fig.20 Inserting the bolt
9 The bolt is inserted.
The bolt [3] can only be pushed into the receiver [5]
when it is cocked.
NOTE!
11 Bolt
11.1 Dismantling the bolt
X Remove the bolt (see Chapter 10).
X Uncock the bolt (turn the bolt with respect to the cap [x]
until the firing pin uncocks).
Fig.21 Uncocking the bolt
X Push the bolt cylinder [z] towards the cap [x] and, at the
same time, pull the bolt handle [y] out of the bolt cylinder.
Fig.22 Withdrawing the handle
16
[x]
[x][y]
[z]
[5]
[3]