Instructions

22
With new rifles (up to 10,000 shots) at 1,000 shot in-
tervals and then at a min. of 5,000 shot intervals
• Clean the barrel from the chamber to the muzzle using a suitable
barrel cleaner and a brass brush.
 
Do not pull the brush backwards and forwards in the barrel.
• Unscrew the brass brush outside the muzzle and carefully pull the clean-
ing rod back through the barrel.
• Pull the cotton wicks through the barrel in a dry condition a few times, un-
til the final cleaning wick does not show any appreciable contamination.
• Wipe the rifle (including the stock) with an oily rag.
• Take the rifle to a dealer/gunsmith for inspection.
15.4 Trigger maintenance
• Dry the trigger and keep free from dust (the release links
have been greased with long-life grease by ANSCHÜTZ).
• To avoid gumming up with resins, adhesion or soiling of the trigger
parts, never wash out the inner parts of the trigger with a spray or oil.
 
No dirt, solvent residues, grease or unsuitable oils must get into the
trigger assembly during maintenance of the firearm. ANSCHÜTZ
recommends cleaning the firearm on its side or with the stock pointing
upwards, which will prevent any adverse
effects on the trigger assembly.
16. Optical sights
17. Troubleshooting
NOTE!
Operating and maintenance instructions can be found
in the individual manufacturer's documentation.
WARNING!
In the event of malfunctions (e.g. shots not dis-
charged, etc.) the rifle must be unloaded, secured
and taken without delay to a specialist dealer /
gunsmith or sent to ANSCHÜTZ.
18. Technical data
Calibre .17 HMR
Bolt Straight pull repeat action
Trigger Target two stage trigger
Trigger weight Adjustment range 90-650 g, pre-set to 550 g
Overall length 104 cm
Barrelled action length 72.5 cm
Length of pull 77.5 cm
Barrel length 55.8 cm
Rifling 55.8 cm
Muzzle diameter 18 mm
Rifling length / No. of turns 228 mm / 8
Barrelled action weight 2240 g
Balance weight approx. 1230 g
Total weight approx. 3470 g