Instructions
13
Push the cartridge, rim first, between clearances on the sides,
into the magazine [12].
Firearms may only be transported in an unloaded state and
in locked containers.
Only genuine ANSCHÜTZ magazines may be used.
The specified capacity of the magazines must not be exceeded.
Only cartridges of the calibre specified on the barrel of the firearm
may be used.
Only new, clean, factory-charged ammunition of the calibre permitted
for the rifle may be used.
The ammunition must conform to the specifications of the C.I.P.
Push the full magazine [12] into the magazine guide
until the magazine release lever [13] engages audibly.
11. Removing the bolt
Open the breech [3] using your index finger (pull back in the direction
of the arrow to the end stop).
Hold down the releasing lever [16] using your thumb.
WARNING!
Danger to life!
Incorrect calibre in the magazine.
Only use the calibre specified on the barrel.
Fig. 11 Filling the magazine
[12]
[3]
Fig. 12 Opening the bolt
[16]
Fig. 13 Activating the bolt catch