User's Manual


The trigger stop denotes the travel from the second stage
to the end stop for the trigger blade.
Setting the trigger stop by means of the trigger stop adjusting screw [4]:
y turn clockwise = trigger stop is shortened
y turn anticlockwise = trigger stop is lengthened
Malfunction!
Trigger stop adjusting screw has been turned beyond
the actuation point (trigger does not actuate).
h Do not turn the trigger stop adjusting screw in
beyond the actuation point.


Release clamping screw [3]. The trigger blade can both be moved
along the guide and also pivoted to the side.

Adjustments:
y Turn the screw for the first stage travel [1] anticlockwise
until the maximum first stage length has been set.
y Cock
y Turn adjusting screw [2] (second stage) anticlockwise
until the trigger releases.
y From this setting, turn adjusting screw [2] approx.
1
/
4
turn
clockwise.
9 The trigger is now adjusted for single stage; there is no longer
any first stage travel.
Danger to life from automatic firing!
Automatically firing shots and malfunctions caused
by minimally set trigger weight and too short a sear
engagement.
h Do not set the trigger weight too low.
h Do not set the sear engagement too short.

