User's Manual

X Move the safety catch [4] into the firing position
(direction of arrow).
[4]
Fig.10 Sliding the safety catch forwards (releasing)
X Pull the trigger [14] and in the same sequence of actions, close the
breech [2] (slide up to the stop in the direction of the arrow) and
pivot the bolt handle [3] downwards.
[3][2]
[14]
Fig.11 Closing the breech
9 The rifle is unloaded and uncocked.

The safety catch can only be engaged/released
when the rifle is cocked. The following describes
the general procedure "releasing/setting the
safety catch".

 
X Slide the safety catch [4] to the rear (direction of arrow).
[4]
Fig.12 Sliding the safety catch back
9 The rifle is cocked and the safety catch is engaged.
