User's Manual
X Place the cartridge, base first, centrally on the loading spring
(in the area with the lettering) and, using the cartridge, push the
loading spring down and into the magazine (see arrows).
Fig. 3 Loading the magazine
9 The magazine [11] is loaded when the cartridge rim is in contact
with the rear wall of the magazine.
Fig.4 Magazine loaded
$$ Only$genuine$ANSCHÜTZ$magazines$may$be$used.
$$ The$specified$capacity$of$the$magazines$must$not$be$exceeded.
$$ Only$cartridges$of$the$calibre$specified$on$the$barrel$of$the$rifle$may$be$used.
$$ Only$new,$clean,$factory-charged$ammunition$of$the$calibre$permitted$for$the$rifle$$
may$be$used.
$$ The$ammunition$must$conform$to$the$specifications$of$the$C.I.P.
Danger to life!
Incorrect calibre in the magazine.
h Only use the calibre specified on the barrel
of the rifle.
X Insert the magazine [11] into the rifle (in the direction of the arrow)
until you feel it engage.
[12] [11]
Fig. 5 Inserting the magazine
9 The rifle is now loaded.
X Pivot the bolt handle [3] upwards (in the direction of the arrow).
9 The firing pin is cocked.