User's Manual

y Pull the cleaning wicks through the barrel in a dry condition a few times,
until the final cleaning wick does not show any appreciable contamina-
tion.
y Wipe the rifle (including the stock) with an oily rag.
y Take the rifle to a dealer/gunsmith for inspection.
17.4 Trigger maintenance
y Dry the trigger and keep free from dust (the release latches have been
greased with long-life grease by Anschütz).
y To avoid gumming, adhesion or soiling of the trigger parts, never wash
out the inner parts of the trigger with a spray or oil.
I No dirt, solvent residues, grease or unsuitable oils must get into the trigger assembly
during maintenance of the rifle. ANSCHÜTZ recommends cleaning the rifle on its side
or with the stock pointing upwards, which will prevent any adverse effects on the
trigger assembly.
18 Troubleshooting
In the event of malfunctions (e.g. shots not dis-
charged, etc.) the rifle must be unloaded, secured
and taken without delay to a specialist dealer /
gunsmith or sent to ANSCHÜTZ.
WARNING!
19 Technical data
Weight 2.4 – 3.9 kg (model-dependent)
Overall length 82.6 – 110 cm (model-dependent)
Barrel length 35.5 – 65 cm (model-dependent)
Rifling 5.5 – 65 cm (model-dependent)
Barrelled action length (model-dependent)
Version Repeater
Calibre .22 l.r., .22 WMR, .17 HMR
The technical data for similar models can be found
at www.anschuetz-sport.com.
NOTE!
24