User guide

Plot Properties
After downloading, certain plot properties and information can be modified. Select the Plot
Properties or Plot Information icon.
Plot Properties that can be changed include:
Graph Titles
Display Mode
Scale/Limit
Markers
Misc. (Plot Display Parameters)
Graph Titles
After downloading the plot, the Main Title can be changed to reflect the site name or other
descriptive information. The Sub Title field can be used to describe the specifics of the
measurement and configuration.
Scale/Limit
The scale of the displayed plot can be modified to help analyze whether the plot meets
pass/fail criteria. The Scale/Limit sub menu activates options to manually enter the scale
limits, or to use the Auto Scale mode.
Manual adjustment sets the upper and lower limits of the display under the
Scale/Limit Submenu.
Auto Scale automatically adjusts the scale for maximum and minimum mea-
surement readings.
Limit Line Off turns off all limit lines.
Single Limit Line can be activated to help identify faults.
Multi-Segment Limit Lines can be activated to set different limits within the
same measurement display for specification requirements.
Markers
Markers M1 through M6 can be activated from the Plot Properties menu.
The six active markers can be displayed on the plot to help identify faults from the line
sweep data.
7-6
Chapter 7 Handheld Software Tools