User guide

System Requirements
The Handheld Software Tools program will run on most any computer running Windows
95/98/NT4/2000/ME/XP/Vista. Minimum requirements and recommendations are:
q
Intel Pentium 100 MHz microprocessor (Pentium II 350 MHz or better recom-
mended)
q
16 MB of RAM (64 MB or above recommended)
q
Hard disk drive with approximately 15 MB of available space (An additional
20 MB free space for storage of captured plots is recommended.)
q
A serial (COM) port or a USB port and USB power adapter cable for communi-
cation with the instrument
NOTE: It is recommended that Windows NT 4.0 users install NT 4.0 Service
Pack 3 (SP3) or above. In addition, Windows 2000 (SP1 or higher) and Win-
dows ME may require installation of the latest Service Pack. Please contact
Microsoft Corporation for further information on obtaining and installing service
packs.
Installation
To install the Handheld Software Tools program:
Step1. Insert the Anritsu Handheld Software Tools disk in the CD-ROM drive.
Step2.
From the Windows Start menu, select Run.
Step3.
Type: X:\Setup.exe where X is the drive letter of your CD-ROM drive.
Step4.
When prompted, press the Enter key to accept the default directory C:\Program
Files\ Software Tools and the installation will begin.
The readme.doc file on the disk provides updated information about the program, and the
Help function provides detailed operating information.
7-2
Chapter 7 Handheld Software Tools