User guide
Table Of Contents
- Title Page
- Table of Contents
- Chapter 1 General Information
- Chapter 2 Functions and Operations
- Chapter 3 Getting Started
- Chapter 4 Cable and Antenna Analyzer Measurements
- Chapter 5 Power Monitor Mode
- Chapter 6 High Accuracy Power Meter
- Chapter 7 Handheld Software Tools
- Chapter 8 Master Software Tools
- Appendix A Windowing
- Index
Step 6.
Using the
Up/Down arrow key, select the Cable = and press ENTER. Use the
Up/Down arrow key to select the Standard cable types stored in the standard Site
Master cable lists (which cannot be edited) or choose
Custom, for additional ca
-
bles. A custom cable list can be created and uploaded using the Handheld Soft-
ware Tools application provided with the Site Master (Chapter 10).
Step 7. Using the
Up/Down arrow key, select the appropriate type of cable and press the
ENTER key. The selected cable type, Prop Vel and Cable Loss in dB/m (or
dB/ft) will be displayed on the DTF parameters screen.
Step 8.
Press ENTER.
Chapter 3 Getting Started
3-9