User guide
Table Of Contents
- Title Page
- Table of Contents
- Chapter 1 General Information
- Chapter 2 Functions and Operations
- Chapter 3 Getting Started
- Chapter 4 Cable and Antenna Analyzer Measurements
- Chapter 5 Power Monitor Mode
- Chapter 6 High Accuracy Power Meter
- Chapter 7 Handheld Software Tools
- Chapter 8 Master Software Tools
- Appendix A Windowing
- Index
Battery
Charging
Illuminates when the battery is being charged. The indicator automatically shuts
off when the battery is fully charged.
External
Power
Illuminates when the Site Master is being powered by the external charging unit.
Serial
Interface
RS232 DB9 interface to a COM port on a personal computer (for use with the
Anritsu Handheld Software Tools program) or to a supported printer.
RF Out/
Reflection 50W
RF output, 50 W impedance, for reflection measurements. Maximum input is
+23 dBm at ±50 Vdc.
RF Detector
(Option 5)
RF detector connector for Power Monitor measurements using an external
detector. Refer to the table of available RF Detectors on page 1-3.
2-2
Chapter 2 Functions and Operations