Data Sheet

GPS RECEIVER (OPTION 31)

Site Master’s GPS option can be used to confirm the exact measurement location

(longitude, latitude, altitude) and Universal Time (UT) information. Each trace

can be stamped with location information to ensure you are taking measurements

at the right location.

In addition, the GPS option enhances the frequency accuracy of the internal

reference oscillator. Within three minutes of acquiring the GPS satellite, the

built-in GPS receiver provides a frequency accuracy to better than 50 ppb, for

Spectrum Analyzer measurements.

GPS Receiver

AM/FM/PM Analyzer

Menus with shortcut icons

Touchscreen keyboard

AM/FM/PM ANALYZER (OPTION 509)

The AM/FM/PM analyzer provides analysis and display of analog modulation.

Four measurement displays are provided.

The RF Spectrum display shows the spectrum with carrier power, frequency, and

occupied BW. The Audio Spectrum display shows the demodulated audio spectrum

along with the Rate, RMS deviation, Pk-Pk/2 deviation, SINAD, Total Harmonic

Distortion (THD), and Distortion/Total. Audio Waveform display shows the time-

domain demodulated waveform. Finally, there is a Summary Table Display that

includes all the RF and Demod parameters.

BUILT-IN KEYBOARD

The built-in touchscreen keyboard gives you access to a fully functional

keyboard, saving valuable time in the field when entering trace names. You

can create shortcuts to customer-configurable user “quick names” to program

frequently used words.

CW SIGNAL GENERATOR (OPTION 28)

This option provides a CW signal generator from 2 MHz to 4 or 6 GHz. The signal

at the output port can be set high (approximately 0 dBm) or low (-30 dBm). With

the use of the CW Signal Generator Kit’s attenuator connected to the RF port, the

level can be varied in 1 dB steps, giving you the ability to generate signals as low as

-110 dBm for receiver sensitivity measurements. The included splitter divides the

signal, allowing for a simultaneous power measurement.

MENUS WITH SHORTCUT ICONS

Find your favorite measurements quickly by pressing the menu key. Create

shortcuts for popular measurements, setups, and functions by simply holding

down any key for more than three seconds. The display here shows the menu with

standard measurements and with the lower part filled with shortcut icons.

LOCAL LANGUAGE SUPPORT

Site Master features eight languages including English, Japanese, Chinese, Italian,

French, German, Spanish and Korean. Two custom user-defined languages can be

uploaded into the instrument using Master Software Tools.

Valuable Options and Features