Specifications

46 Product Brochure
l
MX3701xxA
MX370110A LTE TDD IQproducer
Optional
● PHY/MAC Parameter (Uplink) Setting Range
Display Outline Setting Range
Uplink
delta PUCCH shift Sets delta PUCCH shift 1, 2, 3
N_CS(1)
Sets number of cyclic shift for PUCCH
format 1/1a/1b
0 to 7
N_RB(2)
Sets number of resource block for PUCCH
format 2/2a/2b
0 to 63
Subframe #0 to #9
Subframe Type Display subframe type <Table 1> (Downlink, Uplink, Special)
Number of PUCCHs Sets number of PUCCHs 0 to 8
Number of PUSCHs Sets number of PUSCHs 0 to 8
PUCCH #0 to #7
Data Status Enables/disables PUCCH parameter Disable, Enable
n(1)_PUCCH Sets resource number of PUCCH 1/1a/1b 0 to 764
n(2)_PUCCH Sets resource number of PUCCH 2/2a/2b 0 to 764
nRNTI Sets radio network temporary identier 0000 to FFFF
PUCCH format Sets PUCCH format 1, 1a, 1b, 2, 2a, 2b
Data Type Sets data type PN9x, PN15x, 16 bit repeat, User File, UCI
Data Type Repeat Data Sets 16 bit repeat data 0000 to FFFF (only when Data Type = 16 bit repeat)
Data Type User File Sets user le Select any le (only when Data Type = User File).
Group Hopping Sets enable/disables Disable, Enable
Base Sequence Group Number u Sets base sequence group number 0 to 29
Base Sequence Number v Displays base sequence group number 0 xed
Power Boosting Sets power boosting –20.000 to +20.000 dB
UCI
Transport Block Size Sets transport block size of UCI
1 (When PUCCH format = 1a)
2 (When PUCCH format = 1b)
1 to 13 (When PUCCH format = 2)
2 to 14 (When PUCCH format = 2a)
3 to 15 (When PUCCH format = 2b)
Data Type Sets data type PN9x, PN15x, 16 bit repeat, User File
Data Type Repeat Data Sets 16 bit repeat data 0000 to FFFF (only when Data Type = 16 bit repeat)
Data Type User File Sets user le Select any le (only when Data Type = User File).
Demodulation RS for PUCCH
Group Hopping Sets enable/disables Disable, Enable
Base Sequence Group Number u Sets base sequence group number 0 to 29
Base Sequence Number v Displays base sequence group number 0 xed
PUSCH #0 to #7
Data Status Enables/disables PUSCH parameter Disable, Enable
nRNTI Sets radio network temporary identier 0000 to FFFF
Modulation Scheme Modulation system QPSK, 16QAM, 64QAM
Data Type Sets data type PN9x, PN15x, 16 bit repeat, User File, UL-SCH
Data Type Repeat Data Sets 16 bit repeat data 0000 to FFFF (only when Data Type = 16 bit repeat)
Data Type User File Sets user le Select any le (only when Data Type = User File).
Start Number of RB Start position of RB
0 to 5 (When Bandwidth = 1.4 MHz)
0 to 14 (When Bandwidth = 3 MHz)
0 to 24 (When Bandwidth = 5 MHz)
0 to 49 (When Bandwidth = 10 MHz)
0 to 74 (When Bandwidth = 15 MHz)
0 to 99 (When Bandwidth = 20 MHz)
Number of RBs Total number of RB
1 to 6 (When Bandwidth = 1.4 MHz)
1 to 15 (When Bandwidth = 3 MHz)
1 to 25 (When Bandwidth = 5 MHz)
1 to 50 (When Bandwidth = 10 MHz)
1 to 75 (When Bandwidth = 15 MHz)
1 to 100 (When Bandwidth = 20 MHz)
Power Boosting Set power boosting –20.000 to +20.000 dB
UL-SCH
Transport Block Size Sets transport block size of UL-SCH 0 to 86400
Data Type Sets data type PN9x, PN15x, 16 bit repeat, User File
Data Type Repeat Data Sets 16 bit repeat data 0000 to FFFF (only when Data Type = 16 bit repeat)
Data Type User File Sets user le Select any le (only when Data Type = User File).
RV Index Sets redundancy version index 0, 1, 2, 3
Demodulation RS for PUSCH
Group Hopping Sets enable/disables Disable, Enable
Sequence Hopping Sets enable/disables Disable, Enable
Delta ss Sets delta ss 0 to 29
Base Sequence Group Number u Sets base sequence group number 0 to 29
Base Sequence Number v Displays base sequence group number 0, 1
Cyclic Shift 1st slot
n_cs Sets ncs of rst slot of demodulation RS 0 to 11
alpha
Sets cyclic shift of rst slot of demodulation
RS
Alpha is calculated by the following expression.
Five digits below the decimal are displayed.
alpha = 2×pi×n_cs/12
Cyclic Shift 2nd slot
n_cs
Sets ncs of second slot of demodulation RS 0 to 11
alpha
Sets cyclic shift of second slot of
demodulation RS
Alpha is calculated by the following expression.
Five digits below the decimal are displayed.
alpha = 2×pi×n_cs/12
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com