Specifications

Product Brochure
l
MX3701xxA 45
MX370110A LTE TDD IQproducer
Optional
● PHY/MAC Parameter (Downlink) Setting Range
Display Outline Setting Range
Reference Signal
Frequency Shift Value Displays frequency shift 0, 1, 2, 3, 4, 5
Power Boosting Sets power boosting –20.000 to +20.000 dB
PBCH
Data Status Enable/disables PBCH parameter Disable, Enable
Data Type Sets data type PN9x, PN15x, 16 bit repeat, User File, BCH
Data Type Repeat Data Sets 16 bit repeat data 0000 to FFFF (only when Data Type = 16 bit repeat)
Data Type User File Sets user le Select any le (only when Data Type = User File).
Power Boosting Sets power boosting –20.000 to +20.000 dB
BCH
Data Type Sets data type PN9x, PN15x, 16 bit repeat, User File
Data Type Repeat Data Sets 16 bit repeat data 0000 to FFFF (only when Data Type = 16 bit repeat)
Data Type User File Sets user le Select any le (only when Data Type = User File).
Transport Block Size Sets number of bits required for BCH
0 to 1920 (When Cyclic Prex = Normal), 0 to 1728 (When Cyclic Prex = Extended)
Synchronization Signals
Primary Synchronization Signal
Data Status
Enable/disables primary synchronization
signal parameter
Disable, Enable
Power Boosting Sets power boosting –20.000 to +20.000 dB
Secondary Synchronization Signal
Data Status
Enable/disables secondary
synchronization signal parameter
Disable, Enable
Power Boosting Sets power boosting –20.000 to +20.000 dB
Subframe #0 to #9
Subframe Type Display subframe type <Table1> (Downlink, Uplink, Special)
Virtual Resource Block Type Display virtual resource block type Localized
PHICH Sets ON/OFF of PHICH
ON, OFF (Subframe in Table 2 is turned off by setting UL/DL Conguration. )
PHICH duration Sets PHICH duration Normal, Extended
Number of PHICH Groups
Sets number of PHICH groups in one subframe
Number of OFDM symbols for PDCCH Sets number of OFDM symbols for PDCCH 1 to 4 Symbol
Total Number of CCEs
Display total number of CCEs of control
area in subframe
Number of PDCCHs Sets number of PDCCHs 1 to 64
CCE Arrangement Sets CCE arrangement PDCCH#0 to (Number of PDCCHs
−
1), dummy
Number of PDSCHs Sets number of PDSCHs 1 to 64
RB Arrangement Sets RB arrangement of PDSCH PDSCH#0 to (Number of PDSCHs
−
1)
PCFICH
Data Status Enable/disables PCFICH parameter Disable, Enable
Data Type Sets data type CFI codeword, PN9x, PN15x, 16 bit repeat, User File
CFI Sets CFI codeword type 1, 2, 3
Data Type Repeat Data Sets 16 bit repeat data 0000 to FFFF (only when Data Type = 16 bit repeat)
Data Type User File Sets user le Select any le (only when Data Type = User File).
Power Boosting Sets power boosting –20.000 to +20.000 dB
PDCCH
Data Status Enable/disables PDCCH parameter Disable, Enable
PDCCH format Sets PDCCH format 0, 1, 2, 3
Data Type Sets data type PN9x, PN15x, 16 bit repeat, User File, DCI
Data Type Repeat Data Sets 16 bit repeat data 0000 to FFFF (only when Data Type = 16 bit repeat)
Data Type User File Sets user le Select any le (only when Data Type = User File).
Power Boosting Set power boosting –20.000 to +20.000 dB
DCI
Data Type Sets data type PN9x, PN15x, 16 bit repeat, User File
Data Type Repeat Data Sets 16 bit repeat data 0000 to FFFF (only when Data Type = 16 bit repeat)
Data Type User File Sets user le Select any le (only when Data Type = User File).
Transport Block Size Sets number of bits required for DCI 0 to 576
nRNTI Sets radio network temporary identier 0000 to FFFF
PDSCH
Data Status Enable/disables PDSCH parameter Disable, Enable
nRNTI Sets radio network temporary identier 0000 to FFFF
Modulation Scheme Sets modulation system QPSK, 16QAM, 64QAM
Data Type Sets data type PN9x, PN15x, 16 bit repeat, User File, DL-SCH
Data Type Repeat Data Sets 16 bit repeat data 0000 to FFFF (only when Data Type = 16 bit repeat)
Data Type User File Sets user le Select any le (only when Data Type = User File).
Power Boosting Sets power boosting –20.000 to +20.000 dB
DL-SCH
Data Type Sets data type PN9x, PN15x, 16 bit repeat, User File
Data Type Repeat Data Sets 16 bit repeat data 0000 to FFFF (only when Data Type = 16 bit repeat)
Data Type User File Sets user le Select any le (only when Data Type = User File).
Transport Block Size Sets number of bits required for DL-SCH 0 to 150000 bit
UE Category Sets UE category 1, 2, 3, 4, 5
RV Index Sets redundancy version index 0, 1, 2, 3
PHICH Group
Data Status Enable/disables PHICH parameter Disable, Enable
Number of PHICHs Sets number of PHICH 1 to 8 (Cyclic Prex=Normal), 1 to 4 (Cyclic Prex=Extended)
Power Boosting Display power boosting of PHICH group
PHICH #0 to # (Number of PHICHs–1)
Data Status Enable/disables PHICH parameter Disable, Enable
Orthogonal Sequence Index Sets orthogonal sequence index
0 to 7 (When Cyclic Prex = Normal), 0 to 3 (When Cyclic Prex = Extended)
Data Type Display data type HI
HI Sets code word of HI (HARQ indicator) 000, 111
Power Boosting Set power boosting –20.000 to +20.000 dB
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com