Specifications

44 Product Brochure
l
MX3701xxA
MX370110A LTE TDD IQproducer
Optional
● Common Parameter Setting Range
Display Outline Setting Range
Common
Test Model Sets test model OFF, E-TM1.1, E-TM1.2, E-TM2, E-TM3.1, E-TM3.2, E-TM3.3
Number of Antennas Sets number of antennas 1, 2, 4 (2 and 4 only at Downlink)
Diversity Method Sets diversity method Spatial Multiplexing, Tx Diversity
Precoding Method Sets precoding method Without CDD, Large-delay CDD
Number of Layers Sets number of layers 1, 2, 3, 4
Number of Code words Sets number of code words 1, 2
Codebook Index Sets codebook index
0 to 3 (When Number of Layers = 1)
0 to 2 (When Number of Layers = 2)
0 to 15 (When Number of Antennas = 4)
NID (1)
Sets physical-layer cell-identity group NID (1) 0 to 167
NID (2) Sets physical-layer identity NID (2) 0, 1, 2
Cell ID Sets cell ID 0 to 503
Ng
Sets parameter (Ng) that decides the
arrangement of PHICH
1/6, 1/2
Number of Frames Sets number of frames 1 to max. number of frames in memory
Oversampling Ratio Sets over sampling ratio 2, 4
Sampling Rate Displays sampling rate
1.92
∗
Oversampling Ratio [MHz] (When Bandwidth = 1.4 MHz)
3.84
∗
Oversampling Ratio [MHz] (When Bandwidth = 3 MHz)
7.68
∗
Oversampling Ratio [MHz] (When Bandwidth = 5 MHz)
15.36
∗
Oversampling Ratio [MHz] (When Bandwidth = 10 MHz)
15.36
∗
Oversampling Ratio [MHz] (When Bandwidth = 15 MHz)
30.72
∗
Oversampling Ratio [MHz] (When Bandwidth = 20 MHz)
Bandwidth Sets system bandwidth 1.4, 3, 5, 10, 15, 20 MHz
Downlink/Uplink Sets downlink/uplink settings Downlink, Uplink
Uplink-downlink Conguration Sets uplink-downlink Conguration 0, 1, 2, 3, 4, 5, 6
Special Subframe Conguration Sets special subframe Conguration 0 to 8
Cyclic Prex Sets cyclic prex Normal, Extended
Subcarrier Spacing Displays subcarrier spacing 15 kHz
Number of OFDM symbols per slot
Displays number of OFDM symbols per slot 7 Symbol
Roll Off Length Sets roll-off length for OFDM symbol 0 to 512 Ts
Filter
Filter Type Sets lter type Nyquist, Root Nyquist, Ideal, None
Roll Off Sets roll-off rate 0.1 to 1.0 (only enabled for Nyquist, Root Nyquist)
● Pattern Setting Parameter Setting Range
Display Outline Setting Range
Reference signal
Package Set package name of waveform pattern 31 characters or less
Export File Name Set pattern name of waveform pattern 18 characters or less
Line1 Set comment of waveform pattern 38 characters or less
Line2 Set comment of waveform pattern 38 characters or less
Line3 Set comment of waveform pattern 38 characters or less
Table 1
Subframe
UL/DL Conguration
0 1 2 3 4 5 6
0 D D D D D D D
1 S S S S S S S
2 U U U U U U U
3 U U D U U D U
4 U D D U D D U
5 D D D D D D D
6 S S S D D D S
7 U U U D D D U
8 U U D D D D U
9 U D D D D D D
Table 2
UL/DL Conguration Subframe turned "off"
0 –
1 0, 5
2 0, 1, 4, 5, 6, 9
3 1, 5, 6, 7
4 0, 1, 4, 5, 6, 7
5 0, 1, 3, 4, 5, 6, 7, 9
6 –
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com