Specifications

Chapter 3
Operational Performance
Tests
3-1 INTRODUCTION The tests in this chapter provide a means of partially testing the
MS462XX system for proper operation. These tests should be performed
in their entirety at least once annually. For best results, the tests should
be performed in the sequence presented.
3-2 CHECKING THE
SERVICE
LOG/SELF-TEST
Checking the service log consists of viewing the entries written into the
log.
Procedure:
1. Press the Utility key.
MS462XX MM 3-3
NOTE
The procedures in this chapter, along with the Verification Tests in Chapter 4, will
fully test the operational status of the MS462XX.
CAUTION
The service log contains historical information about instrument condition and
any failures that may have occurred. It should be cleared only by a qualified
service personnel. Such clearing should be accomplished only upon
determining that the errors need not be saved to disk, or printed out for service
purposes.