Specifications

1-13 COMPONENT
HANDLING
The MS462XX series contains components that can be damaged by static
electricity. The following figures illustrate the precautions that should be
followed when handling static-sensitive subassemblies and components.
If followed, these precautions will minimize the possibilities of static-
shock damage to these items.
NOTE
Use of a grounded wrist strap when removing and/or re-
placing subassemblies or parts is strongly recommended.
1. Do not touch exposed contacts on any
static sensitive component.
2. Do not slide static sensitive compo-
nent across any surface.
3. Do not handle static sensitive compo-
nents in areas where the floor or work
surface covering is capable of generat-
ing a static charge.
4. Wear a static-discharge wristband
when working with static sensitive
components.
5. Label all static sensitive devices. 6. Keep component leads shorted to
-
gether whenever possible.
GENERAL INFORMATION COMPONENT HANDLING
MS462XX MM 1-11