Specifications

1-12 CONVENTIONS Throughout this manual, path names may be used to represent the key
-
strokes for a desired action or procedure. The path name begins with a front
panel key selection, followed by additional front panel or soft key selections,
each separated by a forward slash (/). Front panel key names and soft keys
are presented in the manual as they are on the system, that is, in initial caps
or all uppercase letters as appropriate. For example, the following path name
representation displays the system model number, serial number, current
software version, and installed options:
Utility/INSTRUMENT STATE PARAMETERS/SYSTEM
Following the path above, the user would press the Utility front panel key, fol
-
lowed by the INSTRUMENT STATE PARAMETERS soft key, then the SYSTEM
soft key to display the system information.
Individual steps within a procedure may also be presented as sequentially
numbered steps for clarity. Again, front panel key names and soft keys are
presented in the manual as they are on the system. For example, the follow-
ing procedure displays the system model number, serial number, current soft-
ware version, and installed options:
1. Press the Utility front panel key.
2. Select the menu soft keys as follows:
INSTRUMENT STATE PARAMETERS
SYSTEM
1-10 MS462XX MM
CONVENTIONS GENERAL INFORMATION