Specifications

1-5 OPTIONS The following options are easily added to the MS462XX platform for in
-
creased measurement capabilities:
Option Number Description Availability
2 Time Domain All Models
3A Second Internal Source
4
3 GHz Source – B Models
3B Second Internal Source
4
6 GHz Source – B Models
3C Second Internal Source
5
3 GHz Source – C Models
3D Second Internal Source
5
6 GHz Source – C Models
3E Second Internal Source
7
9 Ghz Source – D Models
3F Second Internal Source
7
9 Ghz Source – C Models
4, 4D, 4F Noise Figure
1
B, C and D Models Only
4B, 4E, 4G Noise Figure
6
B, C and D Models Only
5 Frequency Translating
Group Delay
B and C Models Only
6 Third Test Port
3
B and C Models Only
7 T/R Step Attenuator A Models Only
8 Harmonic Measurement All Models
10 AutoCal Control All Models
11 Test Port Connector All Models
2
13 Intermodulation Distortion All Models
24 Processing Upgrade B and C Models Only
1. 50 MHz to 3 GHz
2. Standard Connector is N-female, No cost option for 3.5 mm (male), 3.5 mm (female),
N-Male, or GPC-7.
3. Requires external source, 68XXX Synthesizer
4. Third test port included
5. Third output port included
6. 50 MHz to 6 Ghz
7. Third and Fourth output port included
1-6 IDENTIFICATION
NUMBER
The MS462XX Vector Network Measurement System’s ID number is af
-
fixed to the rear panel. Please use the complete ID number when ordering
parts or corresponding with the Anritsu Customer Service department.
1-7 SERVICE POLICY The MS462XX Vector Network Measurement System’s modular design,
extensive built-in diagnostics, and automated service tools are designed
to support fast exchange of functional assembly level repairs.
Failed assemblies are not field repairable. Once an assembly is found to
be faulty, it should be returned to an authorized Anritsu Service Center
(Table 1-4) for exchange.
1-4 MS462XX MM
OPTIONS GENERAL INFORMATION